CPE & wireless · router
Router / CPE
Router / CPE options for FTTH and SMB: Wi-Fi 6 AX1500 and AX3000, 1–4 GE ports, 2.5GE WAN, PoE PD and a ceiling-mount model with AP function. Fat/fit modes let the same unit work as a router or an access point.
Updated October 24, 2026
- Wi-Fi
- Wi-Fi 6 AX1500 / AX3000
- Ports
- 1–4 GE
- WAN
- GE / 2.5GE
- Power
- DC / PoE PD
The short answer
What this product is specified for.
Included in the quotation
- Port count, connector polish and power configuration
- Model-level datasheet and test data
- Optical budget and splitter plan for the ODN
- Export packing, HS code and Incoterm
A router / CPE sits between the incoming line and the customer LAN. In an FTTH or SMB network it may be the ONT itself, a separate router behind a bridge ONT, or a ceiling-mounted AP with routing functions. The port mix and Wi-Fi generation decide whether the unit is a simple edge router or the main Wi-Fi source for the site.
The range covers a ceiling-mount Wi-Fi 6 router with a 2.5GE PoE PD port (useful where the unit is powered from the LAN), a Wi-Fi 6 AX3000 router with 1 GE WAN and 3 GE LAN, an AX1500 model with 3 GE ports, and a 2.5GE WAN model for multi-gigabit services. Fat/fit modes let the same hardware run as a router or as an AP managed by an AC.
Use the WAN type and the Wi-Fi load to choose the model. A 2.5GE WAN is needed for a multi-gigabit FTTH service; a ceiling AP with PoE PD is better than a desktop router in a corridor or a hotel room. For a site with an OLT and an AC, the same AP can be managed centrally; for a simple shop, the router mode is enough.
Configuration table
The numbers that decide the fit.
Values are from the model datasheet. Where a value is model-dependent, the table says so instead of guessing.
| Family | WAN / LAN | Wi-Fi | Power | Typical use |
|---|---|---|---|---|
| Ceiling Wi-Fi 6 router | 1× 2.5GE WAN/LAN | Wi-Fi 6 AX3000 | PoE PD | Hotel/campus ceiling |
| Wi-Fi 6 AX3000 router | 1× GE WAN + 3× GE LAN | Wi-Fi 6 AX3000 | DC adapter | SMB / office |
| Wi-Fi 6 AX1500 router | 3× GE (1 WAN + 2 LAN) | Wi-Fi 6 AX1500 | DC adapter | Home / small shop |
| 2.5GE Wi-Fi 6 router | 1× 2.5GE WAN + 3× GE LAN | Wi-Fi 6 AX3000 | DC adapter | Multi-gigabit FTTH |
| Fat/Fit AP mode | — | AX1500 / AX3000 | DC / PoE | Router or managed AP |
WAN type, port count, PoE PD and antenna configuration are model-specific. Confirm the exact model on the quotation.
Engineering features
What changes on site.
Wi-Fi 6
AX1500 and AX3000 dual-band radios with OFDMA, MU-MIMO and WPA3 for dense client loads.
2.5GE WAN
A 2.5GE port removes the WAN bottleneck for multi-gigabit FTTH packages.
PoE PD
The ceiling model is powered from the LAN, so it needs no local socket in a corridor or room.
Fat / fit modes
One hardware model can run as a standalone router or as an AP managed by the AC/OLT.
IPv4 / IPv6
DHCP, PPPoE, static IP, NAT, firewall and IPv6 are available on the router models.
Remote management
TR-069 or the AC/OLT profile covers firmware, SSID and VLAN changes without a truck roll.
Selection guide
Which configuration fits which site.
Start from the site, not from the model. The table is a starting point; the final check is the optical and power budget.
| Site | Recommended | Why |
|---|---|---|
| Hotel room / corridor | Ceiling Wi-Fi 6 router, PoE PD | No local socket, central management |
| Small office | AX3000 router, 1 GE WAN + 3 GE LAN | Enough ports and Wi-Fi capacity |
| Multi-gigabit FTTH | 2.5GE WAN + AX3000 | WAN above 1 Gbps |
| Shop / home | AX1500 router, 3 GE | Lower cost, adequate Wi-Fi |
Match the WAN port to the service rate and the power option to the mounting point.
Applications
Where this product is used.
Related equipment
Complete the chain.
The product is quoted as part of a chain. These are the parts that usually travel with it.
CPE & wireless · mobile access
4G / 5G CPE
LTE and 5G routers for sites without fibre.
4G / 5G CPE for temporary, remote and backup access: 5G/4G models with 1–3 GE, USIM, Wi-Fi 6, and LTE CAT6/CAT4 models with 1–4 FE/GE, RJ11 and battery options.
- Cellular
- 5G / 4G LTE
- Ports
- 1–4 FE / GE
- Wi-Fi
- Wi-Fi 4 / 5 / 6
- SIM
- USIM
Best for Industrial & Tunnel Network · Campus Fibre Network · FTTH Access Network
View specifications
CPE & wireless · access points
Wi-Fi AP & AC
Ceiling, wall-plate and high-density APs.
Wi-Fi 6/7 access points and software AC for hotels, campuses and offices: ceiling APs with 2.5GE PoE, wall-plate APs, high-density models, PoF ceiling APs and a built-in or software AC.
- Wi-Fi
- Wi-Fi 6 / Wi-Fi 7
- Uplink
- GE / 2.5GE / PoF
- Power
- PoE / PoF
- Management
- AC / OLT
Best for Campus Fibre Network · Outdoor Wireless Coverage · FTTH Access Network
View specifications
PON access · ONU / ONT
GPON / XPON ONU & ONT
From a 1-GE bridge to a 4-GE Wi-Fi 6 gateway.
XPON ONU and ONT options for FTTH, hotel rooms, offices and outdoor cabinets: 1, 2 or 4 GE ports, Wi-Fi 4/5/6, CATV and POTS options, and 10G PON models. All units are SC single-mode, 20 km, EPON/GPON dual-mode where the model supports it.
- PON
- XPON, EPON/GPON
- User ports
- 1 – 4 × GE
- Wi-Fi
- Wi-Fi 4 / 5 / 6
- Reach
- 20 km
Best for FTTH Access Network · Campus Fibre Network · Outdoor Wireless Coverage
View specifications
PoE switching · managed & unmanaged
PoE Switches
8 to 48 PoE ports, with 10G and 100G uplinks.
PoE switch families from compact 4–8 port units to 48-port Layer 3 switches with 100G uplinks. IEEE 802.3af/at power, VLAN and IGMP isolation, and a 100 m copper limit that decides where the fibre has to take over.
- Ports
- 4 – 48 × GE PoE
- Uplinks
- GE / 10G / 100G
- Power
- 802.3af / at
- Distance
- 100 m copper
Best for CCTV & Surveillance Power · Parking Lot Camera System · Perimeter Security Power
View specificationsProduct FAQ
Router / CPE: questions before the order.
If your question is not here, send the site details and we will answer with the calculation, not a brochure.
Ask an engineerIs a router the same as an ONT?
No. An ONT terminates the PON; a router provides NAT, DHCP and Wi-Fi behind it. Some ONTs include router functions, but a bridge ONT plus a separate router is also common.
What is fat/fit mode?
Fat mode runs the unit as a standalone router; fit mode runs it as an AP managed by an AC/OLT. It lets one hardware model serve both roles.
Why choose a 2.5GE WAN?
For FTTH packages above 1 Gbps. A 1GE WAN caps the service at about 940 Mbps; a 2.5GE WAN lets the router deliver more.
Can the ceiling router be powered by PoE?
The ceiling model supports PoE PD, so it can be powered from a PoE switch. Confirm the PoE class and the switch budget.
Does it support IPv6?
Yes on the router models. Confirmed IPv4/IPv6 dual stack, DHCP/PPPoE/static IP and NAT/firewall are listed on the datasheet.
Can I manage several routers centrally?
Yes, through TR-069 or the AC/OLT profile. The management method depends on the model and the headend.
Next step
Need a Router / CPE configuration checked?
Send the endpoint count, the longest run, the power condition and the destination. We reply with the configuration, the optical/power budget and the quotation assumptions.
No obligation. The plan states its assumptions so your engineer can check it.