Software · management
Network Management & Cloud Platform
Management options for PON and PoE networks: OLT-based OMCI/OAM, SNMP/CLI, TR-069 ACS and a cloud platform for topology, provisioning, alarms and remote maintenance across multiple sites.
Updated October 24, 2026
- PON management
- OMCI / OAM
- Switching
- SNMP / CLI
- CPE
- TR-069 ACS
- Cloud
- Topology / alarms
The short answer
What this product is specified for.
Included in the quotation
- Port count, connector polish and power configuration
- Model-level datasheet and test data
- Optical budget and splitter plan for the ODN
- Export packing, HS code and Incoterm
A PON or PoE network is only as manageable as its software. The OLT can provision ONUs over OMCI/OAM, the switches report over SNMP and CLI, and the CPE can be managed by a TR-069 ACS. A cloud platform adds a single view across sites: topology, alarms, firmware, tenant separation and remote maintenance.
The management choice follows the operating model. A single building may be managed from the OLT web/CLI and a local ACS. A multi-site operator needs a cloud platform with tenant management, a topology map, alarm forwarding and a firmware campaign tool. The same platform can cover PON, PoE switches and APs if the devices expose the right protocols.
Do not buy the software after the hardware. Confirm the management protocol of every device, the northbound interface (SNMP, API, syslog), the alarm forwarding and the firmware update path. A platform that cannot see the ONU or the PoE port is a dashboard, not a management system.
Configuration table
The numbers that decide the fit.
Values are from the model datasheet. Where a value is model-dependent, the table says so instead of guessing.
| Layer | Function | Access | Typical use |
|---|---|---|---|
| OLT / ONU | OMCI/OAM, VLAN, firmware | Web / CLI | PON provisioning |
| Switches | SNMP, CLI, topology | NMS | PoE and aggregation |
| CPE / ONT | TR-069 ACS, Wi-Fi profile | ACS | FTTH / SMB |
| Cloud platform | Topology, alarms, firmware, tenant | Web / API | Multi-site |
| PoE management | Port control, scheduling, reboot | Web / SNMP | CCTV / AP |
Protocol support, northbound API and tenant features are platform-specific. Confirm the integration list before the order.
Engineering features
What changes on site.
Topology
See the OLT, splitter, ONU, switch and AP in one topology instead of separate element managers.
Provisioning
Push VLAN, Wi-Fi, QoS and firmware profiles to a group of devices, not one by one.
Alarms
Forward optical, power and link alarms to email, syslog or a ticket system.
Firmware campaigns
Schedule firmware updates by model or site and track the result.
Tenant management
Separate customers or departments with their own devices and permissions.
Northbound API
Integrate with an existing NMS or OSS via API/SNMP; confirm the interface on the platform datasheet.
Selection guide
Which configuration fits which site.
Start from the site, not from the model. The table is a starting point; the final check is the optical and power budget.
| Operating model | Recommended | Why |
|---|---|---|
| Single building | OLT web/CLI + local ACS | Lowest cost, enough for one site |
| Multi-building campus | SNMP NMS + ACS | One view of switches, OLT and ONUs |
| Multi-site operator | Cloud platform + tenant | Central topology, alarms and firmware |
| CCTV / PoE estate | PoE management + NMS | Port control and remote reboot |
Confirm the device protocols and the northbound interface before choosing the platform.
Related equipment
Complete the chain.
The product is quoted as part of a chain. These are the parts that usually travel with it.
PON access · OLT
GPON OLT
From a 1-PON gateway to a 112-PON headend.
GPON OLT platforms for FTTH, campus and hotel access: 2.5 Gbps downstream and 1.25 Gbps upstream, 1:64 split per PON port and 20 km reach on Class B+ optics. Configurations run from a compact 1-PON gateway with built-in AC to a chassis with up to 112 PON ports.
- Line rate
- 2.5 Gbps ↓ / 1.25 Gbps ↑
- Max split
- 1:64 per PON port
- Reach
- 20 km, Class B+
- PON ports
- 1 – 112
Best for FTTH Access Network · Campus Fibre Network · Outdoor Wireless Coverage
View specifications
PON access · OLT
8-Port EPON OLT
1U, eight EPON ports, up to 512 ONUs.
A 1U EPON OLT with eight PON ports, 16 uplink ports and a 128 Gbps backplane. It supports 1:64 splitting, 20 km reach and up to 512 ONUs, making it a compact headend for CCTV, campus and small FTTH networks.
- PON ports
- 8 × EPON
- Line rate
- 1.25 Gbps symmetric
- Max ONUs
- 512 (64 per port)
- Backplane
- 128 Gbps
Best for CCTV & Surveillance Power · Campus Fibre Network · FTTH Access Network
View specifications
CPE & wireless · access points
Wi-Fi AP & AC
Ceiling, wall-plate and high-density APs.
Wi-Fi 6/7 access points and software AC for hotels, campuses and offices: ceiling APs with 2.5GE PoE, wall-plate APs, high-density models, PoF ceiling APs and a built-in or software AC.
- Wi-Fi
- Wi-Fi 6 / Wi-Fi 7
- Uplink
- GE / 2.5GE / PoF
- Power
- PoE / PoF
- Management
- AC / OLT
Best for Campus Fibre Network · Outdoor Wireless Coverage · FTTH Access Network
View specifications
CPE & wireless · router
Router / CPE
Wi-Fi 6 routers for FTTH and SMB.
Router / CPE options for FTTH and SMB: Wi-Fi 6 AX1500 and AX3000, 1–4 GE ports, 2.5GE WAN, PoE PD and a ceiling-mount model with AP function. Fat/fit modes let the same unit work as a router or an access point.
- Wi-Fi
- Wi-Fi 6 AX1500 / AX3000
- Ports
- 1–4 GE
- WAN
- GE / 2.5GE
- Power
- DC / PoE PD
Best for FTTH Access Network · Campus Fibre Network
View specificationsProduct FAQ
Network Management & Cloud Platform: questions before the order.
If your question is not here, send the site details and we will answer with the calculation, not a brochure.
Ask an engineerDo I need a cloud platform for one building?
Not necessarily. The OLT web/CLI and a local ACS can manage a single building. A cloud platform matters when there are multiple sites, tenants or a firmware campaign.
What is OMCI?
OMCI is the GPON management protocol between the OLT and the ONU. OAM is the EPON equivalent. It covers provisioning, alarms and some Wi-Fi/POTS settings.
What is TR-069?
TR-069 (CWMP) is a CPE management protocol used by an ACS to provision and upgrade ONTs/routers. It is common in FTTH and SMB networks.
Can the platform manage third-party devices?
Only if the device supports the same protocol (SNMP, TR-069, ONVIF etc.) and the platform has a driver. Confirm the integration list before the order.
Does it support multi-tenant?
Selected platforms support tenant separation and role-based access. Confirm the tenant features and the API on the platform datasheet.
Is the software licensed per device?
Licensing is platform-specific. The quotation states the license model, the device count and the support term.
Next step
Need a Network Management & Cloud Platform configuration checked?
Send the endpoint count, the longest run, the power condition and the destination. We reply with the configuration, the optical/power budget and the quotation assumptions.
No obligation. The plan states its assumptions so your engineer can check it.