PON access · triple-play ONT
V2804ACT-A — XPON HGU ONT with CATV and Wi-Fi 5
A triple-play XPON HGU ONT with four GE ports, USB 3.0, 1550 nm CATV with AGC and dual-band Wi-Fi 5. Designed for hotel rooms, MDUs and FTTH subscribers that take data, voice and TV from one fibre.
Updated October 24, 2026
- Model code
- V2804ACT-A
- Configuration family
- GPON / XPON ONU & ONT
- PON
- 1 × XPON (EPON/GPON)
- User ports
- 4 × GE + USB 3.0
What this model is for
XPON HGU ONT with CATV and Wi-Fi 5
Specifications are taken from the model datasheet. Final configuration is confirmed on the quotation.
V2804ACT-A is a triple-play XPON HGU ONT for FTTH and hotel projects. It combines one XPON port, four GE ports, USB 3.0, a 1550 nm CATV receiver with AGC and dual-band Wi-Fi 5 in one desktop unit.
The PON interface is SC/APC on single-mode fibre, with 0 to +4 dBm transmit power, −27 dBm receiver sensitivity, −3 dBm EPON overload, −8 dBm GPON overload and 20 km reach. The CATV receiver accepts 1550 ± 10 nm over +2 to −18 dBm and delivers 47–1000 MHz at 75 Ω with automatic gain control.
The ONT supports OAM/OMCI, Telnet, web and TR-069 management, IPv4/IPv6, IGMP snooping and proxy, MLD snooping, NAT, DHCP server, ACL and EasyMesh. It is powered by an external DC 12 V / 1.5 A adapter and draws 18 W.
Verified specifications
Verified technical specifications.
| Parameter | Verified value |
|---|---|
| PON port | 1 × XPON, EPON PX20+ / GPON Class B+ |
| Connector | SC/APC, single-mode |
| Transmit power | 0 to +4 dBm |
| Receiver sensitivity | −27 dBm |
| Overload | −3 dBm (EPON) / −8 dBm (GPON) |
| Reach / wavelength | 20 km; TX 1310 nm / RX 1490 nm |
| User ports | 4 × GE RJ45 + 1 × USB 3.0 |
| Wi-Fi | 802.11b/g/n/ac, 2.4 GHz + 5.8 GHz, 2×2, 1.167 Gbps |
| CATV | 1550 ± 10 nm input, +2 to −18 dBm, 47–1000 MHz, 75 Ω, AGC |
| Management | OAM/OMCI, Telnet, WEB, TR-069 |
| Power | DC 12 V, 1.5 A external adapter; 18 W |
| Dimensions / weight | 180 × 120 × 32 mm / 280 g |
| Operating conditions | −10 to +55 °C, 5–95% RH non-condensing |
| Storage conditions | −40 to +70 °C, 5–95% RH non-condensing |
Values are from the V2804ACT-A datasheet. Confirm the connector polish, CATV option and power plug on the quotation.
Engineering highlights
What changes on site.
Data, voice and TV on one fibre
The ONT terminates internet, IPTV and CATV on the same drop. The CATV port has AGC, so the RF level stays usable as the optical input drifts.
Dual-band Wi-Fi 5
2×2 radios on 2.4 GHz and 5.8 GHz deliver up to 1.167 Gbps. EasyMesh lets several units form one coverage network in a hotel or MDU.
Remote provisioning
OAM/OMCI and TR-069 cover service profiles, firmware upgrades, SSID changes and fault diagnosis without a room visit.
IPv4 and IPv6
Dual-stack routing, DHCP/PPPoE/static IP, NAT, DMZ, ACL and MAC/URL filtering are built in.
CATV with AGC
The receiver accepts +2 to −18 dBm at 1550 nm and holds the RF output across 47–1000 MHz, which simplifies headend commissioning.
Standard 12 V supply
An external DC 12 V / 1.5 A adapter keeps heat out of the ONT and makes replacement straightforward.
Parts that complete the chain
Parts that complete the chain.
PON access · OLT
GPON OLT
From a 1-PON gateway to a 112-PON headend.
GPON OLT platforms for FTTH, campus and hotel access: 2.5 Gbps downstream and 1.25 Gbps upstream, 1:64 split per PON port and 20 km reach on Class B+ optics. Configurations run from a compact 1-PON gateway with built-in AC to a chassis with up to 112 PON ports.
- Line rate
- 2.5 Gbps ↓ / 1.25 Gbps ↑
- Max split
- 1:64 per PON port
- Reach
- 20 km, Class B+
- PON ports
- 1 – 112
Best for FTTH Access Network · Campus Fibre Network · Outdoor Wireless Coverage
View specifications
PON access · OLT
8-Port EPON OLT
1U, eight EPON ports, up to 512 ONUs.
A 1U EPON OLT with eight PON ports, 16 uplink ports and a 128 Gbps backplane. It supports 1:64 splitting, 20 km reach and up to 512 ONUs, making it a compact headend for CCTV, campus and small FTTH networks.
- PON ports
- 8 × EPON
- Line rate
- 1.25 Gbps symmetric
- Max ONUs
- 512 (64 per port)
- Backplane
- 128 Gbps
Best for CCTV & Surveillance Power · Campus Fibre Network · FTTH Access Network
View specifications
PON access · ODN
Fiber Optic Splitter (PLC)
1×2 to 1×64, SC/UPC or SC/APC.
Planar lightwave circuit splitters from 1×2 to 1×64 for PON ODN construction. Typical insertion loss runs from 3.6 dB at 1×2 to 20.5 dB at 1×64; each batch ships with test data and the connector polish you specify.
- Ratios
- 1×2 – 1×64
- Wavelength
- 1260 – 1650 nm
- Insertion loss
- 3.6 – 20.5 dB
- Connector
- SC/UPC / SC/APC
Best for FTTH Access Network · Campus Fibre Network · CCTV & Surveillance Power
View specifications
Optical transmission · receiver
CATV Optical Receiver
1550 nm to RF, with AGC options.
CATV optical receivers for FTTH and building distribution: 1550 nm input, 47–1000 MHz RF output, 75 Ω, AGC options and +2 to −18 dBm input range. Models with PON and CATV ports are available for triple-play ONUs.
- Wavelength
- 1550 ± 10 nm
- Input range
- +2 to −18 dBm
- RF band
- 47–1000 MHz
- Impedance
- 75 Ω
Best for FTTH Access Network · Campus Fibre Network
View specificationsModel questions before the order
V2804ACT-A: questions before the order
If your question is not here, send the site details and we will answer with the calculation, not a brochure.
Ask an engineerDoes V2804ACT-A work on both EPON and GPON?
Yes, it is an XPON dual-mode ONT. The PON mode and profile must be set for the OLT in use; it will not auto-register on an incompatible headend configuration.
Does the CATV port need a separate transmitter?
Yes. The ONT receives a 1550 nm CATV signal that is combined onto the ODN at the headend. The OLT does not generate CATV; a 1550 nm transmitter and EDFA sit beside it.
What connector polish does it use?
The datasheet specifies SC/APC. Keep the same polish across the ODN or use hybrid patch cords, and state the polish on the order.
How many GE ports are available?
Four GE RJ45 ports plus one USB 3.0 port. All four LAN ports are on the subscriber side; the PON port is the uplink.
Can it be managed by a third-party ACS?
It supports TR-069 and OAM/OMCI. The ACS profile and firmware must be confirmed against the OLT and the management platform before deployment.
Can data, CATV and voice run at the same time?
They can share one fibre when the ONT variant has the required CATV and POTS ports. Confirm the exact port list for the ordered variant; a data-only ONT cannot add CATV or voice later without a different unit.
Next step
Need V2804ACT-A checked against your site?
Send the endpoint count, the longest run, the power condition and the destination. We return the optical/power budget and the quotation assumptions.
No obligation. The plan states its assumptions so your engineer can check it.