PON access · Wi-Fi 6 ONT
V2804AX15-R — XPON HGU ONT with Wi-Fi 6
A Wi-Fi 6 XPON HGU ONT with four GE ports, USB 3.0, dual-band AX1500 and four external antennas. Built for FTTH subscribers and hotel rooms that need gigabit Wi-Fi and a clean fibre route.
Updated October 24, 2026
- Model code
- V2804AX15-R
- Configuration family
- GPON / XPON ONU & ONT
- PON
- 1 × XPON (EPON/GPON)
- User ports
- 4 × GE + USB 3.0
What this model is for
XPON HGU ONT with Wi-Fi 6
Specifications are taken from the model datasheet. Final configuration is confirmed on the quotation.
V2804AX15-R is a Wi-Fi 6 XPON HGU ONT for FTTH and hospitality projects. It provides one XPON port, four GE ports, USB 3.0 and a dual-band Wi-Fi 6 radio rated at 1.5 Gbps.
The PON interface is SC/UPC on single-mode fibre, with 0 to +4 dBm transmit power, −27 dBm receiver sensitivity, −3 dBm EPON overload, −8 dBm GPON overload and 20 km reach. The Wi-Fi side uses 2×2 radios on 2.4 GHz and 5.8 GHz with four 5 dBi external antennas, OFDMA, MU-MIMO, 1024-QAM, WPA3 and EasyMesh.
The unit supports OAM/OMCI, Telnet, web and TR-069 management, IPv4/IPv6, IGMP/MLD snooping, NAT, DHCP, ACL and a tray-mounted fibre route. It is powered by an external DC 12 V / 1.5 A adapter and draws 18 W.
Verified specifications
Verified technical specifications.
| Parameter | Verified value |
|---|---|
| PON port | 1 × XPON, EPON PX20+ / GPON Class B+ |
| Connector | SC/UPC, single-mode |
| Transmit power | 0 to +4 dBm |
| Receiver sensitivity | −27 dBm |
| Overload | −3 dBm (EPON) / −8 dBm (GPON) |
| Reach / wavelength | 20 km; TX 1310 nm / RX 1490 nm |
| User ports | 4 × GE RJ45 + 1 × USB 3.0 |
| Wi-Fi | 802.11a/n/ac/ax 5 GHz + 802.11b/g/n 2.4 GHz, 2×2, 1.5 Gbps |
| Antennas | 4 × 5 dBi external |
| Security | WEP-64/128, WPA/WPA2/WPA3, ACL/MAC/URL filtering |
| Management | WEB, TELNET, OAM/OMCI, TR-069 |
| Power | DC 12 V, 1.5 A external adapter; 18 W |
| Dimensions / weight | 260.4 × 157.4 × 45.8 mm / 0.45 kg |
| Operating conditions | −10 to +55 °C, 5–95% RH non-condensing |
| Storage conditions | −40 to +70 °C, 5–95% RH non-condensing |
Values are from the V2804AX15-R datasheet. The shell is available in black or white; confirm the colour and power plug on the quotation.
Engineering highlights
What changes on site.
Wi-Fi 6 for dense rooms
OFDMA, MU-MIMO and 1024-QAM raise capacity in hotels and MDUs where many clients share the same airtime.
One SSID, two bands
Smart Connect presents a single Wi-Fi name across 2.4 GHz and 5 GHz, so clients do not have to choose a band manually.
Tray-mounted fibre
The bottom fibre tray keeps the drop and the patch tidy, which matters when the ONT sits on a desk or a wall in a guest room.
WPA3 and filtering
WPA3, ACL, MAC/URL filtering and anti-DDOS protection are available on the gateway.
Remote management
OAM/OMCI and TR-069 cover provisioning, firmware, SSID changes and diagnostics from the headend.
Standard 12 V supply
External DC 12 V / 1.5 A adapter; the ONT itself draws 18 W, keeping heat out of the enclosure.
Parts that complete the chain
Parts that complete the chain.
PON access · OLT
GPON OLT
From a 1-PON gateway to a 112-PON headend.
GPON OLT platforms for FTTH, campus and hotel access: 2.5 Gbps downstream and 1.25 Gbps upstream, 1:64 split per PON port and 20 km reach on Class B+ optics. Configurations run from a compact 1-PON gateway with built-in AC to a chassis with up to 112 PON ports.
- Line rate
- 2.5 Gbps ↓ / 1.25 Gbps ↑
- Max split
- 1:64 per PON port
- Reach
- 20 km, Class B+
- PON ports
- 1 – 112
Best for FTTH Access Network · Campus Fibre Network · Outdoor Wireless Coverage
View specifications
PON access · OLT
8-Port EPON OLT
1U, eight EPON ports, up to 512 ONUs.
A 1U EPON OLT with eight PON ports, 16 uplink ports and a 128 Gbps backplane. It supports 1:64 splitting, 20 km reach and up to 512 ONUs, making it a compact headend for CCTV, campus and small FTTH networks.
- PON ports
- 8 × EPON
- Line rate
- 1.25 Gbps symmetric
- Max ONUs
- 512 (64 per port)
- Backplane
- 128 Gbps
Best for CCTV & Surveillance Power · Campus Fibre Network · FTTH Access Network
View specifications
PON access · ODN
Fiber Optic Splitter (PLC)
1×2 to 1×64, SC/UPC or SC/APC.
Planar lightwave circuit splitters from 1×2 to 1×64 for PON ODN construction. Typical insertion loss runs from 3.6 dB at 1×2 to 20.5 dB at 1×64; each batch ships with test data and the connector polish you specify.
- Ratios
- 1×2 – 1×64
- Wavelength
- 1260 – 1650 nm
- Insertion loss
- 3.6 – 20.5 dB
- Connector
- SC/UPC / SC/APC
Best for FTTH Access Network · Campus Fibre Network · CCTV & Surveillance Power
View specifications
CPE & wireless · access points
Wi-Fi AP & AC
Ceiling, wall-plate and high-density APs.
Wi-Fi 6/7 access points and software AC for hotels, campuses and offices: ceiling APs with 2.5GE PoE, wall-plate APs, high-density models, PoF ceiling APs and a built-in or software AC.
- Wi-Fi
- Wi-Fi 6 / Wi-Fi 7
- Uplink
- GE / 2.5GE / PoF
- Power
- PoE / PoF
- Management
- AC / OLT
Best for Campus Fibre Network · Outdoor Wireless Coverage · FTTH Access Network
View specificationsModel questions before the order
V2804AX15-R: questions before the order
If your question is not here, send the site details and we will answer with the calculation, not a brochure.
Ask an engineerIs V2804AX15-R a Wi-Fi 6 or Wi-Fi 5 ONT?
It is Wi-Fi 6 (802.11ax) on 5 GHz and Wi-Fi 4 (802.11b/g/n) on 2.4 GHz, with a combined rate of up to 1.5 Gbps. The 5 GHz radio supports 2×2 MIMO and 1024-QAM.
Can it run as a bridge instead of a router?
The datasheet lists routing mode as the default. Bridge mode depends on the firmware profile; confirm it with the model datasheet and the OLT/ACS profile before ordering.
What is the difference between this and the CATV model?
V2804AX15-R has Wi-Fi 6 and no CATV port. The CATV model adds a 1550 nm receiver with AGC and uses SC/APC; choose the model by the services the room needs.
Does it support EasyMesh?
Yes, the datasheet lists Wi-Fi EasyMesh. Mesh units must come from the same management ecosystem and be commissioned with the same profile.
What fibre connector does it use?
SC/UPC. If the ODN is SC/APC, use a hybrid patch cord or change the ODF adapter; do not mate different polish types directly.
Can the 2.4 GHz and 5 GHz radios use different SSIDs?
Yes. Separate SSIDs and VLANs are configured through the ONT profile. Band steering depends on the firmware; test it on the actual ACS/OLT before promising a single-SSID experience.
Next step
Need V2804AX15-R checked against your site?
Send the endpoint count, the longest run, the power condition and the destination. We return the optical/power budget and the quotation assumptions.
No obligation. The plan states its assumptions so your engineer can check it.